Ericsson EDN312 Guía de usuario descargar pdf (Pagina 5)

Introduction

4/1553-HSC 901 101/2 Uen B 2009-02-27

1 Introduction

This document describes the function, usage and specifications of the EDA

EDN312, ESN108, EXN104 and EPN102. It is intended for planning,

installation and maintenance personnel.

The reader should have a basic understanding of the Internet Protocol (IP).

The guide can be read separately, but for a full understanding of the EDA

system the reader is referred to the System Description.

The guide can be printed on a monochrome printer, but the illustrations are

easier to understand if a color printer is used.

1.1 Revision History

The guide is valid for EDA 4.1 R1A and later. Refer to the Release Notes

for valid versions of the nodes and the application software (SW). Other

product versions, with functions not described in this guide, may be

available.

1.1.1 This Revision (B)

The fan replacement procedure has been corrected.

1.1.2 Version (A)

This is the first version of this manual for EDA 4.1, based on the EDA 4.0

document 4/1553-HSC 901 35/4 Uen B.

Other than editorial changes, this document has been revised as follows:

• References to TFTP multicast have been removed.

• References to EDN312xs-i have been included.

• The node technical specifications (previously part of section 10 on

page 44) have been removed, since the node datasheets are included

in the Customer Product Information.

1 2 3 4 5 6 7 8 9 10 ... 51 52

Sin comentarios

Ericsson EDN312 Guía de usuario Pagina 5