Ericsson RX8000 Series Guía de usuario Pagina 136

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 236
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 135
Chapter 5
Figure 5.20 Input > IP Input Web Page
The following user-editable fields are displayed on this web page:
User-editable fields in the IP Interface Section:
IP Address 1/2 – allows the user to input the relevant IP address.
Subnet Mask 1/2 – allows the user to input the relevant Subnet Mask address.
Default Gateway 1/2 – allows the user to input the relevant Default Gateway
address.
VLAN (Virtual Local Area Network) Tag 1/2 - allows the user to input the
relevant VLAN Tag Value.
VLAN Enable 1/2 - allows the user to enable/disable the VLAN.
ICMP (Internet Control Message Protocol) Enable 1/2 – allows the user to
enable/disable network 1/2 to ping the input (and Port 1/2).
SNMP Enable – allows the user to enable/disable the SNMP facility via the input
port.
IP params to XML output – allows the user to enable/disable the sending of the
IP parameters out as XML from the input port.
User-editable fields in the Card Config Settings section:
ARP Enable 1/2 – allows the user to enable/disable the ARP on Network 1/2.
Ethernet Line Mode 1/2 – allows the user to set the Ethernet line mode for
Network Interface 1/2.
MAC Mode – allows the user to change the current MAC Mode.
User-editable fields in the Listening Stream Section:
FEC Enable – allows the user to enable/disable FEC. This facility is only
available when FEC is licensed.
EN/LZT 790 0005 R1A
5-20
Vista de pagina 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 235 236

Comentarios a estos manuales

Sin comentarios