Ericsson LBI-39001 Manual de usuario descargar pdf (Pagina 4)

QUICK USAGE GUIDE

This section presents a brief summary on how to place phone calls

through the EDACS Jessica system. For more information about the

access methods, refer to the detailed usage section.

2.1.

MAKING PHONE CALLS FROM AN EDACS

RADIO

These "generic" instructions for all EDACS radios assume a typical

Jessica configuration. To determine the exact sequences to access Jessica

features from a specific radio, refer to the operator's manual for that radio.

The steps for making phone calls from an EDACS radio are presented

below.

Placing a Call

Initiate the call by one of the following actions:

1. Press the "*" key, enter the destination telephone number, and

then depress the PTT button.

2. Enter the destination telephone number, press the "*" key, and

then depress the PTT button.

3. Press the special call button (typically SCN or SCAN). Select the

telephone number from the list and depress the PTT button.

Common Speed Dialing

Consult your System Administrator for the common speed dial

numbers. Follow the steps for "Placing a Call" and use the common

speed dial number.

Answering a Call

Simply press the PTT button and hold while talking. Full duplex

radio users need only press PTT initially.

3.2. RADIO USERS

The chart below shows how to use a radio to accomplish several tasks

with Jessica.

Task Accomplishing Task with Jessica

Placing a PSTN

destination call

See your radio operator's manual for

specific usage on interconnect calls.

Number requires a Least-Cost Routing

(LCR) code as the leading digit of the

destination phone number. The LCR code

is customer-defined, but typically is "9."

Once the number is passed through Jessica

and into the PSTN, the radio user will hear

ringing.

Placing a PBX destination

call

Once the number is passed through Jessica,

the radio user will hear ringing.

Receiving a call To an EDACS radio user, reception of a

PSTN- or PBX-originated call involves

pressing the PTT button to answer it.

DTMF overdial Consult your radio operator's manual for

specific usage. Please refer to LBI-39000

for details on DTMF. DTMF is allowed in

clear voice only. Note: Currently, EDACS

radios generate the North American DTMF

tones. Therefore, to use overdial outside

North America, EDACS radios would be

required to generate the appropriate tone

set.

Terminating a call A radio-originated or PSTN- or PBX-

originated call may be terminated for a

radio with a keypad by pressing the SPC or

Clear button. Radios without a keypad may

terminate the call by not keying the radio

within the hang time period.

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Ericsson LBI-39001 Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Ericsson LBI-39001