Ericsson EDACS Station GETC1e 19D901868G4 Manual de instalación descargar pdf (Pagina 18)

LBI-38987B CONFIGURATION

TQ-3357 V4.03 (or later)

1. Connect the TQ-3360 programming cable from the

PC's serial port connector to the GETC Shelf

connector J104 (A DB-25 to DB-9 adapter may be

needed.)

2. Using the TQ-3357’s LOAD utility, copy the

Station Turbo software (344A4414) into the PC

Programmer’s working directories.

3. Load the Field Macro “gtc_9505.mac” into the

TQ-3357 PC Programmer using the instructions

contained in Chapter 5 of the TQ-3357 manual.

4. Refer to TQ-3357 Chapter 5 Load1E Utility for

complete instructions on downloading the Turbo

software .

TQ-3357 V3 (or earlier)

1. Connect the TQ-3360 programming cable from the

PC's serial port connector to the GETC Shelf

connector J100 (A DB-25 to DB-9 adapter may be

needed.)

2. Using standard DOS commands or a software file

manager, create a directory named "LOAD1E" on

the PC's hard drive.

3. Make "LOAD1E" the current directory and copy

the following files from the software diskette into

the "LOAD1E" directory:

• load1e.exe

• 1etop.hex

• 1ecrc.hex

• 1ebot.hex

4. Run the load1e.exe program. Follow the on screen

instructions and program the Turbo Board.

Additional programming instructions may be found

in SRN1062 and LBI-38822.

NOTE

When using Turbo Board 344A4414 Group 2 (or

later) software, re-programming the GETC Turbo

Board will not alter previously stored Personality

Data. When Personality Data is present,

“load1e.exe” clears and performs CRC functions

over the code portion of memory only.

NOTE

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Sin comentarios

Ericsson EDACS Station GETC1e 19D901868G4 Manual de instalación Pagina 18