Ericsson F221m Manual de usuario descargar pdf (Pagina 60)

Installation and User Manual

60/73

Select the COM port on which your ERICSSON Fixed Cellular

Terminal is attached from the drop down box.

The default COM port value is set to COM1 and may be

changed to any serial port number between COM1 and COM10.

Under most circumstances however, the likely serial port to

which the ERICSSON Fixed Cellular Terminal is attached will be

either COM1 or COM2.

The COM port number has now been modified. Click on Save to store the change and

close the Admin window with the Exit button.

If you wish to verify that DeskTop.SMS can communicate with the ERICSSON

Fixed Cellular Terminal after changing the COM port number, re-open the

Administration window. If it opens without displaying COM port doesn't exist or

modem is not properly conencted!, you have successfully changed the COM port

number. To double-check, confirm that DeskTop.SMS is sending AT commands to

the modem in the Output commands box (lower left-hand side of the

Administration window).

9.2 Changing the Baud Rate…

The baud rate is simply the speed of the data transferral between the PC and the ERICSSON

Fixed Cellular Terminal.

To change the baud rate that DeskTop.SMS is using whilst communicating with the modem,

please follow this procedure:

Click on the Baud rate box on the Admin window.

Select the baud rate from the drop down box.

The default baud rate value is set to 9600 and may be changed

to either 2400, 4800, 9600 or 19200. Please note that unless you

intend to install a different GSM modem than the Ericsson FCT,

you will not need to change this value.

The baud rate has now been modified. Click on Save to store the change and close

the Admin window with the Exit button.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 73 74

Sin comentarios

Ericsson F221m Manual de usuario Pagina 60