Ericsson EDACS MDX Manual del operador descargar pdf (Pagina 16)

In addition to entering a value from the keyboard, there are key

actions available as described below:

<+> Increments the field by 1 and writes the new value to

the radio if the transmitter is on.

<-> Same as <+> only it decrements.

↑↓→← Arrow keys move the cursor between fields on the

screen.

From Figure 5:

(1) This is a numeric field that is used to set the Transmit Modulation

level. This field will accept any hex value from 00 - 3F and any digital

value from 0 - 63, depending on the current state of the screen

(Hexadecimal or decimal) displays. The bar indicator changes with

and provides a direct representation of the value of this field.

(2) This field is a display only field and indicates the minimum value that

can be selected.

(3) This field is a display only field and indicates the maximum value

that can be selected.

TX Modulation Settings

1. Feed a 200 mV rms, 1 kHz tone into the TX Audio Jacks on the

TQ-0613 Test Box.

LBI-38898

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Sin comentarios

Ericsson EDACS MDX Manual del operador Pagina 16