Ericsson EDACS PRISM HP Manual del operador descargar pdf (Pagina 38)

Receiving An Emergency Call

When receiving an emergency call on the selected

group and system, an alert beep is heard and comes

on. The message flashes in the display on

line two until the emergency condition is cleared.

Declaring An Emergency Call

To send an emergency call to selected system and

group (or on an optionally preprogrammed group), pro-

ceed as follows:

1. Press and hold the red EMERGENCY button that is

on top of the radio in front of the antenna for approxi-

mately one second (this time is programmable and

therefore could be longer or shorter; check with the

system administrator). The radio will transmit an

emergency call request with the radio ID until an

emergency channel assignment is received.

2. When the working channel assignment is received,

the radio sounds a single beep indicating the radio

has auto keyed (see Auto Key) and is ready for voice

transmission.

flashes on line two in the display until

the emergency is cleared.

3. Press PTT and speak into the microphone in a

normal voice. and momentarily turns on.

4. Release PTT when the transmission is complete.

*RXEMER*

*TXEMER*

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 103 104

Sin comentarios

Ericsson EDACS PRISM HP Manual del operador Pagina 38