Ericsson EDACS PRISM HP Manual del operador descargar pdf (Pagina 84)

3. Press and hold the PTT button. The radio will display

and a short beep sounds (if programmed) indi-

cating that communication can begin.

4. Hold the radio approximately three inches from the

mouth and speak in a normal voice into the micro-

phone (located at upper left front corner).

5. Release the PTT button when the transmission is

complete and listen for a reply.

The following procedures outline scan operations for

conventional channels.

Adding Channels To A Scan List

1. With scan operation turned off select the desired

channel to add to the selected conventional system

channel scan list.

Press

(Scan) or (System). The current

status will be displayed in column 10 of line three for

a time-out period. Press

or to add the

channel to the scan list. is displayed on the line.

This sets the selected channel for non-priority scan-

ning. A second press of

or sets the chan-

nel for priority-two scanning and is displayed on

line three. An additional press of

or sets

the channel for priority-one scanning and is

displayed on line three. If the priority-one or priority-

two channels are already set and a new channel is

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 103 104

Sin comentarios

Ericsson EDACS PRISM HP Manual del operador Pagina 84