
•
An emergency declared or cleared.
•
Receiving an individual or phone call.
•
Receiving Agency, Fleet or System All Call.
•
Pressing or to turn scan on or off.
DATA LOCKOUT MODE
During the voice call scan hang time (pre-pro-
grammed) the radio will not receive data calls.
CONVENTIONAL MODE OPERATION
The radio functions in the conventional mode when
using conventional communications channels (non-
trunked). Each channel consists of a preset frequency
pair for transmit and receive during repeater operation,
or a single frequency for both transmit and receive during
talk-around (no repeater) operation. To use this mode,
the operator selects a conventional system which in-
cludes one or more conventional channels. Each conven-
tional channel may have one or more features, such as
Channel Guard, programmed when the channel is se-
lected.
The CLEAR/MONITOR button unmutes the receiver
so activity on the selected channel can be monitored.
When pressed and held for approximately 3 seconds this
button toggles conventional channel decoding (Channel
Guard, Digital Channel Guard ) on and off if programmed
for the selected channel. will be on when channel
guard is enabled on a selected channel.
82
Comentarios a estos manuales