
Press . turns on. Scroll through the list of
stored phone numbers using the
or key
until the desired number is displayed. Press
.
2. Press the PTT button; when the radio is clear to
transmit turns on, turns off and the channel
access tone sounds. Line one shows the called
individual’s name if found in the list of stored phone
numbers. The message displays on line
two.
Direct Dialing of Individual Calls (System Model
only)
The following procedures describes how to initiate
and complete a direct dialed individual call.
1. If the individual call ID is not stored in the pre-stored
list of call ID’s but the individual unit ID is known, it
can be entered directly from the keypad.
Note: The ID of the last individual call made can be
recalled by pressing
then the OPTION button.
2.
Press the PTT button to transmit. turns on,
turns off and the channel access tone sounds. Line
one shows the called individual’s ID followed by the
logical ID number of the unit being called. The mes-
sage displays on line two. Proceed talking
into the microphone.
*INDV*
*INDV*
49
Comentarios a estos manuales