
Installing the Equipment
Table 2.4 Host Status Connector Pin-outs
Pin Description
Pin 2 RS-232 - RxD
Pin 3 RS-232 - TxD
Pin 5 RS-232- Ground
Pin 7 RTS (Active)
Pins 1,4,6,8,9 Not connected.
2.6.9 RF Output Ports
The EQ8096 supports up to 24 RF output ports using
F-type connectors. Each output port supports up to
4 adjacent RF channels.
The RF output provides a user configurable parameter to control the output.
Table 2.5 RF Input Connector
Input Specification
Connector type F-type, Female
Connector designation RF n
Pin-outs: Centre
Shield
RF Output
Ground/Chassis
Impedance
75 Ω
Caution!
The F-connector is not intended for continuous connections and disconnections.
Use a sacrificial connector if the EQ8096 is intended to be used in this way.
2.7 Indicators
2.7.1 Front Panel
The front panel carries a power-on LED (Green), an Alarm LED (Red) and an Active
Unit (DTI Lock) LED (Blue) (described in Chapter 4, Alarms). There is also a front
panel LCD screen. The possible displays are detailed in Table 2.5.
2/1553-FGC 101 1019 Uen A
2-15
Comentarios a estos manuales